DEI 556C Bypass Module
Most new and late model vehicles have factory anti-theft systems to prevent a vehicle being started without the specific owner's key in the ignition. These factory anti-theft systems provide a valuable service to the vehicle owner helping to prevent a thief from hot-wiring and starting your vehicle. Unfortunately these systems also prevent a remote starter from starting your vehicle, unless you left the key in the ignition, which could easily result in vehicle theft.
Directed Electronics, Inc (DEI), the world leader in remote start technology and factory interface systems, has developed a complete line of 555/556 –series modules that interface with the factory anti-theft systems only during the remote start operation. Therefore the DEI 555/556 series Bypass Modules do not compromise your factory anti-theft system, preserving its integrity, and leaving it fully functional at all other times. DEI Bypass Modules give you the best of both worlds, maintaining the protection of your factory anti-theft system, while enabling you to enjoy the convenience and comfort of a DEI Valet Remote start system.
Of course, you need to use the correct DEI Bypass Module for your specific vehicle. See the DEI Bypass Reference Chart for the correct DEI 555/556 Series Bypass Module for your vehicle.
The DEI 556C provides an easy way for interfacing a remote starter with the vehicle's OEM (factory) transponder-based anti-theft system, while maintaining the integrity of the factory system. The factory system uses a very small electronic chip hidden in the top of the key to send a code to the vehicle's transceiver whenever the ignition is energized. Normally, for this to happen, the key must be placed in the ignition and turned to the run position. This energizes a coil surrounding the key, which in turn energizes the chip which sends a signal to the vehicle. If the vehicle does not detect the code being sent, the vehicle will start and then immediately shut off and the anti-theft light will flash.
DEI 556C Module Guide
The DEI 556C will provide a valid code to the vehicle whenever it is remote started, enabling the vehicle to start and continue to run, but will have no effect on the factory anti-theft system during normal operation of the vehicle. The factory transponder-based anti-theft system remains fully functional when the remote starter is not in use.
Works with any aftermarket remote start system
Compatible with the factory anti-theft system
Maintains the integrity of the factory security system Simple two wire installation
Compact design, easy to mount
No key required for operation
The 556CW is designed to work with Directed remotes start systems that have a wait-to-start input wire. The wait-to-start wire is required for proper operation of the 556CW.
Two separate keys required for programming. Using the same key twice will not work.
Not compatible with 2005 Dodge Durango
DEI 556C Bypass Module
Return to DEI Valet Remote Starters