DEI 465T Replacement Remote
Discontinued by the manufacturer
2-button, Uncoded, Binary, 3-channel, Red LED, 302 MHz, Non-Code-Hopping replacement remote.
Used with older versions of the DEI Valet 711T &the 712T Keyless Entry Systems and with some of the older versions of the DEI Steal Stopper, Viper &Wasp alarm systems.
Generally these DEI systems were manufactured before 1996 (Date Codes up to 5K, which is November, 1995.)
Newer DEI systems were manufactured with the newer DEI 493T "Trinary" remote transmitter technology. The newer DEI 493T replacement remote is not interchangeable with the older DEI 465T remotes. You must use the correct remote that matches your DEI system.
The DEI 465T remote has 10 traces in the circuit board that must be "cut" to exactly match the traces that are cut on the circuit board of your specific DEI system.
Your DEI system has an unique "transmitter code" that determines exactly which of the 10 traces needs to be cut to match your system.
The "transmitter code" should be found inside an original remote transmitter on a white sticker attached to the black chip in the lower part of the right hand photo. It will read 2 xxx D. (Such as 2186D, or 2153D, etc.) This code will enable us to cut the correct traces for you.
Locating the transmitter code
The "transmitter code" may also be found on a white sticker on the DEI system's control unit, CPU, (also known as "the brain").
See locating the CPU
Tell us this code in the information block at the bottom of the order form so we can cut the traces for you.
Price $29.00 each Not Available
Return to Replacement Remotes